High Elongation, Two Component Epoxy System with Excellent Thermal Shock Resistance
Master Bond EP110F8-3 is a two part epoxy system ideal for sealing, encapsulating, potting, and casting applications. “This toughened system provides very good flexibility and possesses a relatively high elongation of 120-150%”, says Rohit Ramnath, Senior Product Engineer. “It o...
Master Bond EP110F8-3 is a two part epoxy system ideal for sealing, encapsulating, potting, and casting applications. “This toughened system provides very good flexibility and possesses a relatively high elongation of 120-150%”, says Rohit Ramnath, Senior Product Engineer. “It offers a low tensile modulus of around 5,000-15,000 psi and a shore A hardness of 40-50 at room temperature.”
EP110F8-3 features excellent thermal cycling and shock resistance, passing 10 cycles from -55°C to +125°C with no signs of cracking. It has a superior electrical insulation profile with a low dielectric constant of 2.67 as well as a low dissipation factor of 0.006, both measured at 75°F for 1 KHz.
EP110F8-3 has a convenient mix ratio of one to two by weight; the color of Part A is clear while the color of Part B is amber. It has a low mixed viscosity of 1,000-2,000 cps and flows readily. Working life for a 100 gram batch is 2-3 days at room temperature and can be cured within a few hours at 250-300°F.
Master Bond Electrically Insulative Epoxies
Master Bond EP110F8-3 is a two part heat curing epoxy system for potting, sealing, encapsulation and casting applications, with unsurpassed electrical insulation and thermal cycling capabilities. Read more about Master Bond’s electrically insulative epoxy adhesives at https://www.masterbond.com/properties/electrically-insulative-adhesive-systems or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: [email protected].
James Brenner, Marketing Manager
Email: [email protected]
MASTER BOND INC.
154 Hobart Street
Hackensack, NJ 07601-3922
# # #
X21Med: Polyolefin Primer/Adhesive Meets ISO 10993-5 Requirements
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity (<250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes ISO 10993-5 ...
EP42HT-2Med: High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
EP3HTMed: Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
UV18Med: Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED403Med: LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...