Optically Clear, Low Viscosity Epoxy System Features High Flexibility
Two component epoxy, Master Bond EP88FL, is a highly flexible, optically clear compound formulated for bonding, coating, sealing, potting and encapsulation. It is easy to use, with a mixing ratio of one to one by weight or volume.
EP88FL withstands thermal cycling and shock. It is ideal in applications where stress relief is needed with a tensile modulus ranging from 10,0...
EP88FL withstands thermal cycling and shock. It is ideal in applications where stress relief is needed with a tensile modulus ranging from 10,000 psi to 20,000 psi. This system provides an elongation of 30-50% and bonds well to a wide variety of substrates such as metals, ceramics, plastics and glass. Despite curing with a good degree of flexibility, it cannot be considered soft since it has a Shore D hardness between 45-55 at 75°F. The refractive index is 1.51 at 589 nm, making the system relevant for applications in optics, opto-electronics, aerospace and OEM.
The mixed viscosity of EP88FL is 800-1,200 cps at room temperature, and its working life is 20-30 minutes for a 100 gram batch. EP88FL can be cured at room temperature or elevated temperatures. The optimal cure is overnight at 75°F plus 1 to 2 hours at 150-200°F. Master Bond EP88FL is available in standard packaging ranging from ½ pint to 5 gallon containers as well as specialty packaging including FlexiPaks®, syringes and gun dispensers.
Master Bond Optically Clear Epoxy Systems
EP88FL is a free-flowing, highly flexible, stress absorbing epoxy with a low modulus of elasticity. It is optically clear with a refractive index of 1.51. Read more about Master Bond™s optically clear adhesive systems at https://www.masterbond.com/properties/optically-clear-polymer-adhesives or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: [email protected].
James Brenner, Marketing Manager
Email: [email protected]
MASTER BOND INC.
154 Hobart Street
Hackensack, NJ 07601-3922
# # #
LED405Med: Biocompatible, Nanosilica Filled LED Curable Adhesive
Master Bond LED405Med is a one part, nanofilled system that cures quickly upon exposure to a 405 nm LED light. It does not require a UV light source. It meets ISO 10993-5 for cytotoxicity and resists sterilization. It can cure up to 1/8 think and has low shrinkage upon cure. It also features outstanding optic...
X21Med: Polyolefin Primer/Adhesive Meets ISO 10993-5 Requirements
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity (<250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes ISO 10993-5 ...
EP42HT-2Med: High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
EP3HTMed: Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
UV18Med: Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED403Med: LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...