Highly Flexible UV Curable Adhesive Meets ISO 10993-5 Standard for Cytotoxicity
Master Bond UV15X-6Med-2LV is a UV curable, non-cytotoxic adhesive that features optical clarity and abrasion resistance.
Master Bond UV15X-6Med-2LV is a UV curable, non-cytotoxic adhesive that features optical clarity and abrasion resistance. Not only can it be ...
Master Bond UV15X-6Med-2LV is a UV curable, non-cytotoxic adhesive that features optical clarity and abrasion resistance. Not only can it be utilized for bonding, but it can also be employed for sealing, coating, and encapsulating purposes. It has a high degree of flexibility with an elongation that exceeds 100% and a low tensile modulus of 20,000-50,000 psi at room temperature. This flexibility allows it to withstand extreme thermal cycling and mechanical shock without inducing stress on components/parts. It bonds well to similar and dissimilar substrates including glass, metals and plastics.
UV15X-6Med-2LV is a one part system that cures upon exposure to a UV light source emitting at a wavelength of 320 to 365 nm with an energy output as low as 20-40 milliwatts/cm2. It can cure in as little as 10 to 30 seconds, and in sections up to ¼ inch. A successful curing process entails complete exposure to the UV light source, for this reason there should be no shadows or UV blocking agents in the substrates used. As a one part system, it requires no mixing prior to use. This compound has a medium viscosity of 20,000-40,000 cps and is not oxygen inhibited. It is electrically insulative with a volume resistivity of more than 1012 ohm-cm at room temperature. UV15X-6Med-2LV has a refractive index of 1.50. It is serviceable over the temperature range of -80°F to +250°F.
Since UV15X-6Med-2LV meets the ISO 10993-5 certification it can be used in medical device manufacturing applications where this requirement is vital. It has good resistance to water, cleaning agents, e-beam, ethylene oxide and gamma radiation. Packaging is available in syringes, ½ pint, pint, quart and gallon sizes.
Master Bond Biocompatible Adhesives
Master Bond UV15X-6Med-2LV is an optically clear, one part UV curable system. It has high flexibility and passes ISO 10993-5. Read more about Master Bond’s biocompatible adhesives for medical device manufacturing at https://www.masterbond.com/properties/biocompatible-adhesive or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: [email protected].
Published by Master Bond Inc. on Nov 24, 2020
LED405Med: Biocompatible, Nanosilica Filled LED Curable Adhesive
Master Bond LED405Med is a one part, nanofilled system that cures quickly upon exposure to a 405 nm LED light. It does not require a UV light source. It meets ISO 10993-5 for cytotoxicity and resists sterilization. It can cure up to 1/8 think and has low shrinkage upon cure. It also features outstanding optic...
X21Med: Polyolefin Primer/Adhesive Meets ISO 10993-5 Requirements
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity (<250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes ISO 10993-5 ...
EP42HT-2Med: High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
EP3HTMed: Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
UV18Med: Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED403Med: LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...