Toray Raytela® Polymer Optical Fiber Bending Test#2 Data Sheet
Toray Raytela® Polymer Optical Fiber Achieves 34,500 Repeated Bends Before Breakage.

Toray Raytela® Polymer Optical Fiber Larger Lighted Area
Toray, Industries Inc., Raytela® POF has a unique polymer design structure which transmits light at a large, 79° angle through the core, providing up to 1.8 times more light broadcasting at the distal end when compared to conventional polymer cables.

TOYOLAC® 950 ME1 and 950 ME2 Safety Data Sheet
Toray Transparent ABS resin TOYOLAC® 950 ME1 and 950 ME2 for Medical application Safety Data Sheet

Low Viscosity Epoxy Adhesive
Low viscosity, two component epoxy system

Silicone Compound for Medical Applications
Two component, biocompatible silicone compound for potting and encapaulation

USP Class VI Approved UV Curable Adhesive
High strength, flexible, UV curable system

Biocompatible Epoxy Withstands Multiple Sterilization
Two component epoxy compound for medical device assembly

Biocompatible Epoxy for Medical Devices
Low viscosity, two component epoxy compound

General Comparison of Different Chemistries for Medical Device Adhesives
Get important information about epoxies, silicones, UV/LED curing systems and more, at a glance, in this easy to read chart.  Performance properties such as bond strength and sterilization resistance, as well as applications, service temperature range and other key properties are broken down by chemistry

Colorite® Rigid Series - Injection Molding Compounds
Colorite® rigid vinyl formulations are designed to offer good heat stability and high flow characteristics for ease of processing. These compounds can be formulated to withstand degradation and discoloration associated with sterilization. Special formulations have been created for applications that require ga

Klaran UVC LEDs
Klaran UVC LEDs for are specifically developed to enhance Point-of-Care aseptic techniques. With a peak emittance between 260 nm to 270nm, Klaran UVC LEDs uniquely provide stronger and more consistent germicidal effect against top healthcare associated infection (HAI) pathogens.

Latex-Free Cold Seal
Rollstock that delivers fiber-free, light peel

Pentafill® L - Bench-top Machine for Sealing Pre-filled Single-dose Plastic Containers
Bench-top machine for lab research and small quantity start-up production, meeting the same industrial sealing standards as higher capacity Pentafill models.

Pentafill® L+Fill - Bench-top Machine for Filling and Sealing Single-dose Plastic Containers
Bench-top machine for lab research and small quantity start-up production that meets the same industrial sealing standards as higher capacity Pentafill models.

Pentafill® M - Semi-automatic Machine for Filling and Sealing Single-dose Plastic Containers
Semi-automatic filling and sealing machine ideal for small to medium batches.

Tekni-Films Catalog 2020
High-performance films, unit-dose packaging, filling equipment for pharmaceutical, medical, animal health, cosmetic/personal care applications

Pentafill® A25 - Automatic Machine for Filling and Sealing Single-dose Plastic Containers
Automatic machine for filling and sealing single-dose plastic containers in a sterile or non-sterile environment.

Tekni-Films SBC Sell Sheet 2020
Ultra-high moisture and oxygen barrier PVDC films for pharmaceutical, veterinary, over-the-counter and nutraceutical thermoformable blister applications

TekniMD® PX - High-performance Thermoformable Copolyester Film
TekniMD® PX is a high-performance, thermoformable copolyester film developed as a performance-oriented alternative to PETG for medical device packaging applications.

Pentafill® A - Automatic Machines for Filling and Sealing Single-dose Plastic Containers
Automatic machines for filling and sealing single-dose plastic containers at different production speeds.

Single & Multi-Dose Containers + Contract Filling
LF of America is your turn-key partner for innovative single and multi-dose injection-molded containers and contract filling of non-sterile products.

Cleanroom Bags, Film for Pharmaceutical and Medical Applications
Our specialization lies in the extrusion and conversion of polyethylene film in cleanroom Class 7 environments.

Metal Alloy Strength Comparison
Most of the tubing produced today uses 304 stainless steel as the alloy of choice due to its great combination of strength, ductility, price, and availability. 304 is a great starting point for many designs as it works for most applications. However, this alloy may not be optimal for the application and may r

Medical Components
Specialists in high-performance materials design, molding and manufacturing

Colorite® 11 series - Extrusion compounds
Colorite® 11 series compounds are clear medical grade vinyl compounds formulated for extrusion applications. They provide exceptional clarity, superior heat stability and high flow characteristics.

Colorite® 12 series - Injection molding compounds
Colorite® 12 series compounds are clear medical grade vinyl compounds formulated for injection molding applications. They provide exceptional clarity, superior heat stability, high flow characteristics and good mold release. These compounds are available in durometers ranging from 35 Shore A to true rigid and

Colorite® 41 series - Extrusion compounds
Colorite® 41 series compounds are flexible vinyl compounds formulated for extrusion applications requiring NSF certification. These compounds are available in durometers ranging from 75 to 90 Shore A.

CELLENE™ Product Selection Guide
Product Selection Guide

CELLENE™ Thermoplastic Elastomer
CELLENE™ is a range of Thermoplastic Elastomer compounds that combine the performance benefit of vulcanized rubber with the processing properties of thermoplastics. CELLENE™ TPE compounds are suitable for a wide variety of applications in medical devices, packaging and other regulated markets. CELLENE™ compou

Colorite® Flexchem series - Ultra high-performance vinyl compounds
Flexchem® is a family of PVC compounds that have been developed as an alternative to silicone for various applications. These formulations utilize a non-phthalate plasticizer and are available in 35-65 Shore A hardness. The compounds can be extruded or injection molded using conventional equipment.