Toughened, Urethane Based Epoxy System Meets USP Class VI Specifications
Master Bond EP30DPBFMed is a two part, flexibilized epoxy-urethane hybrid system that can be used for bonding, sealing, coating, and encapsulat...
Master Bond EP30DPBFMed is a two part, flexibilized epoxy-urethane hybrid system that can be used for bonding, sealing, coating, and encapsulation. It is formulated for disposable and reusable medical devices, meeting USP Class VI requirements while also complying with RoHS3 in accordance with the EU directive 2015/863/EU. EP30DPBFMed is resistant to thermal cycling and sterilization, withstanding exposure to gamma radiation, e-beam, EtO, as well as other liquid sterilants.
Its low viscosity of 3,000 to 6,000 cps for Part A, and 200 to 500 cps for Part B, makes it readily pourable and ideal for potting and casting. EP30DPBFMed has a long working life of 60 to 90 minutes per 100 grams mass at 75°F, and features a low exotherm during the curing process. The system contains no solvents or diluents.
Due to the addition of a urethane based flexibilizer, EP30DPBFMed offers both a higher abrasion resistance and a higher elongation when compared to a typical epoxy system. At room temperature, it has an elongation at break of 20 to 40%, and Shore D hardness of 30 to 50. It is useful in applications where low stress is important, due to its low modulus value. This compound is electrically insulative with a volume resistivity greater than 1014 ohm-cm. EP30DPBFMed is serviceable over a wide temperature range from cryogenic 4K to 250°F.
This formulation is available for use in a variety of standard packaging options ranging in size from ounce kits to gallon kits. Specialty packaging in premixed & frozen syringes, and gun applicators with double barrel cartridges is also available.
Published by Master Bond Inc. on Apr 02, 2020
LED405Med: Biocompatible, Nanosilica Filled LED Curable Adhesive
Master Bond LED405Med is a one part, nanofilled system that cures quickly upon exposure to a 405 nm LED light. It does not require a UV light source. It meets ISO 10993-5 for cytotoxicity and resists sterilization. It can cure up to 1/8 think and has low shrinkage upon cure. It also features outstanding optic...
X21Med: Polyolefin Primer/Adhesive Meets ISO 10993-5 Requirements
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity (<250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes ISO 10993-5 ...
EP42HT-2Med: High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
EP3HTMed: Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
UV18Med: Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED403Med: LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...