UV22DC80-1Med: Dual Curing Epoxy Meets Biocompatibility and Cytotoxicity Requirements
Master Bond UV22DC80-1Med is a single component, nanosilica filled compound featuring a UV and heat curing mechanism.
Not only does it pass USP Class VI tests for biocompatibility, but it also meets ISO 10993-5 for cytotoxicity, making it ideal for many applications in the medical device industry. As a nanosilica filled system, UV22DC80-1Med offers low shrinkage upon cure, excellent abrasion resistanc...
Not only does it pass USP Class VI tests for biocompatibility, but it also meets ISO 10993-5 for cytotoxicity, making it ideal for many applications in the medical device industry.
As a nanosilica filled system, UV22DC80-1Med offers low shrinkage upon cure, excellent abrasion resistance and dimensional stability with a low coefficient of thermal expansion of 30-35 x 10-6 inch/inch/°C. It is a reliable electrical insulator with volume resistivity of more than 1014 ohm-cm and dielectric constant of 3.85 at 60 Hz. UV22DC80-1Med is optically clear with a refractive index of 1.52.
The UV curing process for UV22DC80-1Med takes only 10-30 seconds at a 365nm wavelength and 10-40 mW/cm2of UV output. The heat curing process can be initiated at 80°C, making it highly desirable in applications involving heat sensitive components. Optional post curing at 125-150°C for 15-30 minutes will increase the glass transition temperature to over 125°C. This system is not oxygen inhibited.
UV22DC80-1Med has a low viscosity of 500-3,500 cps at 75°F (~ 23°C). It bonds well to a variety of substrates including metals, glass, ceramics and most plastics. This compound has very good resistance to various sterilization methods including autoclaving and many chemical sterilants. It is available for use in 30 cc EFD syringes, ½ pint, pint, and quart containers.
Published by Master Bond Inc. on Jul 31, 2019
LED405Med: Biocompatible, Nanosilica Filled LED Curable Adhesive
Master Bond LED405Med is a one part, nanofilled system that cures quickly upon exposure to a 405 nm LED light. It does not require a UV light source. It meets ISO 10993-5 for cytotoxicity and resists sterilization. It can cure up to 1/8 think and has low shrinkage upon cure. It also features outstanding optic...
X21Med: Polyolefin Primer/Adhesive Meets ISO 10993-5 Requirements
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity (<250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes ISO 10993-5 ...
EP42HT-2Med: High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
EP3HTMed: Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
UV18Med: Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED403Med: LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...