Non-Premixed and Frozen, One Part Epoxy for Chip Coating
Master Bond Supreme 3CCM-85 is a single component epoxy designed for glob top and chip coating applications
Featuring a combination of thermal conductivity and electrical insulation properties, Master Bond Supreme 3CCM-85 is a new single component ep...
Featuring a combination of thermal conductivity and electrical insulation properties, Master Bond Supreme 3CCM-85 is a new single component epoxy initially designed for glob top and chip coating applications. However, this system can also be utilized for encapsulation and bonding. Supreme 3CCM-85 cures within 2-3 hours at 175-185°F [80-85°C], which is advantageous for use on heat sensitive components and substrates.
Supreme 3CCM-85 is a toughened adhesive system, that bonds well to a variety of similar and dissimilar substrates. It has a high volume resistivity of more than 1014 ohm-cm and a thermal conductivity of 5-10 BTU•in/ft2•hr•°F [0.72-1.44 W/(m•K)]. The system is serviceable from -100°F to +350°F [-73°C to +177°C].
Since Supreme 3CCM-85 is not premixed and frozen and has a very long open time at room temperature, it is more convenient to handle and store than typical two component glob top systems. This opaque black compound has a thixotropic paste-like consistency and is easy to apply either manually or with an automated dispenser. Master Bond Supreme 3CCM-85 is available for use in common size syringes ranging from 10 cc to 30 cc as well as in standard size containers.
Master Bond Adhesives for Electronic Applications
Master Bond Supreme 3CCM-85 is a multifunctional system for glob top, encapsulation and bonding applications featuring high thermal conductivity, electrical insulation and toughness. Read more about Master Bond’s adhesive systems for the electronic industry at https://www.masterbond.com/industries/adhesives-assembly-electronic-devices or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: [email protected].
James Brenner, Marketing Manager
Email: [email protected]
MASTER BOND INC.
154 Hobart Street
Hackensack, NJ 07601-3922
Published by Master Bond Inc. on Jun 25, 2019
LED405Med: Biocompatible, Nanosilica Filled LED Curable Adhesive
Master Bond LED405Med is a one part, nanofilled system that cures quickly upon exposure to a 405 nm LED light. It does not require a UV light source. It meets ISO 10993-5 for cytotoxicity and resists sterilization. It can cure up to 1/8 think and has low shrinkage upon cure. It also features outstanding optic...
X21Med: Polyolefin Primer/Adhesive Meets ISO 10993-5 Requirements
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity (<250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes ISO 10993-5 ...
EP42HT-2Med: High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
EP3HTMed: Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
UV18Med: Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
MasterSil 912Med: Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED403Med: LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...