Low Viscosity, Two Component Epoxy Has an Extended Working Life and Low Exotherm
Two Component Epoxy System for High Performance Bonding, Coating, Sealing and Encapsulating Featuring Low Viscosity, Extended Working Life and Easy Application.
Suitable for large castings, Master Bond EP21LVSP6 combines a low viscosity and low ...
Suitable for large castings, Master Bond EP21LVSP6 combines a low viscosity and low exotherm with a working life of 3-5 hours. It can also be used for bonding, sealing and coating applications in aerospace, electronic, electrical, optical and other specialty industries.
This two part epoxy offers has a non-critical one to one mix ratio, by weight or volume and its processing is facilitated with color coding—Part A is clear and Part B is amber clear. It is formulated to cure at room temperature or more rapidly at elevated temperatures.
EP21LVSP6 bonds well to a variety of similar and dissimilar substrates such as metals, composites, glass, ceramics, rubbers and plastics. It has a tensile strength exceeding 7,000 psi and a tensile lap shear strength greater than 2,500 psi. The system is able to withstand chemicals including water, oil, fuel, acids and bases. It is a competent electrical insulator over the temperature range of -60°F to +250°F. EP21LVSP6 is available in a variety of packing options, including ½ pint, pint, quart, gallon and 5 gallon kits as well as a gun dispenser.
Master Bond Potting and Encapsulation Compounds
Formulated for potting and encapsulation, Master Bond EP21LVSP6 is particularly suited for larger castings. It features low exotherm, good flow and a long working life. Read more about Master Bond’s potting and encapsulation systems at http://www.masterbond.com/applications/potting-and-encapsulation or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: firstname.lastname@example.org.
For more information contact Master Bond Inc.
High Temperature Resistant Epoxy Withstands Multiple Sterilization Cycles
Capable of withstanding repeated cycles of autoclaving, radiation, EtO and cold sterilants, EP42HT-2Med is a room temperature curable, two part epoxy that complies with USP Class VI testing. It may be used as an adhesive, sealant, coating and casting material. It has excellent electrical insulation properties...
Chemically Resistant Polymer Meets USP Class VI Specifications
Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, EtO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of -60°F to +400°F [-51°C to +204°C], is 100% reactive and does ...
Medical Grade UV System Meets USP Class VI Specifications
USP Class VI certified UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light emitting at a wavelength of 320-365 nm. It is ideal for high productio...
Biocompatible Silicone Passes USP Class VI Testing
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma radiation, EtO and some types of ...
LED Curable System Meets USP Class VI Specifications
One part LED403Med cures in thin sections in 15-30 seconds upon exposure to a 405 nm wavelength LED light. Featuring excellent optical clarity and light transmission properties, it fully cures tack-free without any oxygen inhibition. This dimensionally stable system resists various sterilization methods inclu...